Configure Network Interfaces¶

Configure the network interface on each node as shown in the following examples:

BART InterfacesBARNEY Interfaces

$ TCPIP SET CONFIGURATION INTERFACE WE0/HOST=16.112.249.245 -
_$/NETWORK=255.255.255.0/BROADCAST=16.112.249.255

$ TCPIP SET CONFIGURATION INTERFACE WE1/HOST=16.112.249.246 -
_$/NETWORK=255.255.255.0/BROADCAST=16.112.249.255

Verify the configuration:

$ TCPIP SHOW CONFIGURATION INTERFACE

Interface: WE1
   IP_Addr: 16.112.249.246  NETWRK: 255.255.255.0  BRDCST: 16.112.249.255
Interface: WE0
   IP_Addr: 16.112.249.245  NETWRK: 255.255.255.0  BRDCST: 16.112.249.255

$ TCPIP SET CONFIGURATION INTERFACE ZE0/HOST=16.112.249.247 -
_$/NETWORK=255.255.255.0/BROADCAST=16.112.249.255

$ TCPIP SET CONFIGURATION INTERFACE ZE1/HOST=16.112.249.248 -
_$/NETWORK=255.255.255.0/BROADCAST=16.112.249.255

Verify the configuration:

$ TCPIP SHOW CONFIGURATION INTERFACE

Interface: ZE0
   IP_Addr: 16.112.249.247  NETWRK: 255.255.255.0  BRDCST: 16.112.249.255
Interface: ZE1
   IP_Addr: 16.112.249.248  NETWRK: 255.255.255.0  BRDCST: 16.112.249.255