How to Manually Boot an OpenVMS IA-64 System From the EFI Shell¶
Last modified:
This procedure explains how to manually boot an OpenVMS IA-64 system from the EFI Shell when the required boot option does not exist in NVRAM.
-
Log in to the MP Console from the IA-64 system console:
The MP Main Menu is displayed.MP login: Admin MP password: ***** ...MP MAIN MENU: CO: Console VFP: Virtual Front Panel CM: Command Menu SMCLP: Server Management Command Line Protocol ... -
Enter
COto switch to the EFI console:MP> CO -
When the EFI Boot Manager menu is displayed, use the arrow keys and
Enterto selectEFI Shell [Built-in].EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.13 [4412] Please select a boot option OpenVMS V8.2 EFI Shell [Built-in] Internal Bootable DVD Boot Option Maintenance Menu System Configuration Menu Use ^ and ⌄ to change option(s). Use Enter to select an optionExample output:
Loading.: EFI Shell [Built-in] EFI Shell version 1.10 [14.61] Device mapping table fs0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig80590BE1-8BD3-1) fs1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part4,Sig80590BE0-8BD3-1) ... Shell>Important
Understanding the File System Mapping
The
FSndevice mappings represent all drives available to the console.For the mappings shown in this example:
fs0:corresponds to device DKA0: on the local OpenVMS system.fs1:represents another FAT partition on the same local disk.
If a bootable DVD is inserted into the DVD drive, the
fs0:device mapping will correspond to the DVD device instead of the system disk. -
Boot OpenVMS from the EFI Shell using the following commands:
Shell> fs0: fs0:\> cd efi\vms fs0:\efi\vms> vms_loader.efiAlternatively, to perform a conversational boot, enter the following EFI command:
fs0:\efi\vms> vms_loader.efi -fl 0,1